The INERTEX family of gasketing and sealing products are produced by proprietary processes protected by both u.s. and world. All INERTEX products share the following typical properties:

• 100% expanded virgin PTFE • Pressure range, full vacuum to 3,000psi • Low coefficient of friction (.02 like wet ice)
• Temperature range, -450°F to +600°F • Extremely soft, excellent conformability • FDA suitable (FDA 21 CRF 177.1550)
• pH range from 0 to 14 • Little creep or cold flow • No aging or hardening in service

Click here to request a product sample

INERTEX® EZ-Seals are a molded, rigid and densified form of our Joint Sealant product. It provides the user ease of installation and maximum performance for applications where flanges can not be separated far enough apart to lay Joint Sealant in place.

The raised inner portion of the INERTEX® EZ-Seal is easily compressible, and will fill irregularities, voids and nicks on the flange contact surface. Requiring less bolting stress to seal, INERTEX® EZ-Seal is an ideal replacement for PTFE envelope gaskets, conventional PTFE sheets, and filled PTFE sheets.

Standard Sizes - Click on this link to view our standard sizes

Product Benefits:

Soft and compressible under low bolt loads. Excellent for use on glass-line, plastic, and FRP plastic flanges
High rigidity for use in difficult installation conditions
Self-aligning. Simple to use
Helps you meet tough EPA standards for fugitive flange emissions
Individually packaged and protectively wrapped. Clearly marked on the gasket face with size, application limits, and the INERTEX® brand name